Filter by
Plasma Cutters for Metals
Using compressed air and electricity, these cutters make accurate cuts in conductive materials such as steel, stainless steel, aluminum, brass, and copper. They include a torch that is easier to maneuver and control than a portable saw, so it allows you to make straight and contoured cuts in tight spaces. Use cutters intermittently when cutting materials of the maximum thickness.
Cutter for 1/4" thick steel is wired for 240 volts and includes an adapter cord for 110 volts. Motor is single phase.
Cutter for 5/8" thick steel is wired for 208 and 230 volts, single phase. It can be wired for 3 phase.
Plasma Cutters
A
B
For Recommended Steel Thickness | Cutting Time On/Off, min. | Voltage, V AC | Ht. | Wd. | Dp. | Cutting Cable Lg., ft. | Weight, lbs. | Includes | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Use On Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Copper | |||||||||||
A | 1/4" @ 110 V AC, 1/4" @ 240 V AC | 6/10 | 110/240 | 12.6" | 7.9" | 18 1/8" | 16 | 22 | Torch, Ground Cable and Clamp, Input Power Adapters, Spare Parts Kit | 00000000 | 000000000 |
B | 5/8" @ 208 V AC, 5/8" @ 230 V AC | 6/10 | 208/230 | 15" | 12" | 24" | 20 | 43 | Torch, Ground Cable and Clamp, Spare Parts Kit | 00000000 | 00000000 |
Replacement Parts for Style A
Gas Distributor/Start Cartridge
Shield Cup
Cutting Tip
Electrode