We will reply to your message within an hour.
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys.
Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws.
The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.
Carry heavy loads without slippage—pulleys mount with a bushing for a more secure grip on the shaft than set screws.
Move heavy loads without slippage—pulleys mount with a bushing for a more secure grip on the shaft than set screws.
Add these free-spinning pulleys to your timing belt setup to minimize vibration and keep belts from wearing out.
These HTD (high torque drive) pulleys have a curved tooth shape that provides higher strength than trapezoidal teeth.
Keep high torque drive (HTD) timing belt systems running tightly with these idler pulleys. Made with built-in, free-spinning ball bearings, they're installed on shafts or belt tensioners to remove slack from timing belts.
For higher speed or higher torque applications, these GT series timing belt pulleys provide a more precise fit than HTD pulleys. Use them where accuracy is critical, such as in storage and retrieval systems or in robotics.
Teeth are curved and set in an offset pattern for high strength with 25% less operating noise than pulleys and belts with trapezoidal teeth.
Curved teeth with a high pitch provide superior load distribution and reduce wear. They mount with a bushing for a more secure grip on the shaft than set screws.
Worm gears use screw threads to reduce shaft speed by ratios of 10:1 and greater while transmitting motion at a right angle.
Sprockets transmit power to drive belting.
A flexible tire on these couplings safeguards components on your shafts by reducing vibration and shock.