We will reply to your message within an hour.
More
These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.
The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.
Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.
A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.
Particles in liquid won’t clog these nozzles because of their unique internal and external design.
These nozzles project their spray at a right angle from their threaded connection.
Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.
The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.
With a unique internal and external design, these nozzles let particles in liquid pass through instead of clogging.
Save time in applications where you often need to replace worn nozzles. These nozzles consist of a base and a nozzle, so you can replace the tip with just a quarter turn.
By circulating their spray, these nozzles clean faster with more even coverage and less water than stationary tank-washing nozzles.
Internal gears create controlled motion as fluid moves through these nozzles, maintaining speed and producing large droplets to efficiently clean heavily soiled or large-diameter tanks.
To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions.
Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck.
FM approved for use in fire-protection applications, these nozzles produce a heavy, coarse spray to quickly put out fires.
Attaching a spray nozzle to these swivel fittings allows the nozzle to swivel 360° and tilt on a 45° range.
Drill a hole in your pipe and connect one of these fittings to create a connection point for a spray nozzle or swivel fitting.
Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.
This hose is made of steel.