Long-Life Dry-Cutting Blades for Walk-Behind Flat Saws
These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer. Use them with low horsepower (under 20 hp) walk-behind flat saws. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Material | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Diamond Depth | Cutting Application | For Use On | Includes | Each | |
12" Dia. | |||||||||||
20 mm, 1" | Round | 0.125" | 6,300 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 0000000 |
14" Dia. | |||||||||||
20 mm, 1" | Round | 0.11" | 5,400 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 000000 |
20 mm, 1" | Round | 0.125" | 5,400 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 000000 |
20 mm, 1" | Round | 0.14" | 5,400 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 000000 |
16" Dia. | |||||||||||
20 mm, 1" | Round | 0.125" | 4,800 | Diamond | Steel | 1/4" | Dry | Concrete | Reducer Bushing | 0000000 | 000000 |
18" Dia. | |||||||||||
1" | Round | 0.125" | 3,395 | Diamond | Steel | 1/4" | Dry | Concrete | __ | 0000000 | 000000 |
1" | Round | 0.14" | 3,395 | Diamond | Steel | 1/4" | Dry | Concrete | __ | 0000000 | 000000 |
20" Dia. | |||||||||||
1" | Round | 0.14" | 3,055 | Diamond | Steel | 1/4" | Dry | Concrete | __ | 0000000 | 000000 |
Dry-Cutting Blades for Walk-Behind Flat Saws
Use these blades with low horsepower (under 20 hp) walk-behind flat saws. Blades come with a reducer bushing to adjust the arbor diameter. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Abrasive | Body | Max. Speed, rpm | Diamond Depth | For Use On | Includes | Each | |
12" Dia. | ||||||||||
20 mm, 1" | Round | 0.125" | Diamond | Steel | 6,300 | 0.35" | Concrete | Reducer Bushing | 0000000 | 0000000 |
14" Dia. | ||||||||||
20 mm, 1" | Round | 0.11" | Diamond | Steel | 5,400 | 0.35" | Concrete | Reducer Bushing | 0000000 | 000000 |
20 mm, 1" | Round | 0.125" | Diamond | Steel | 5,400 | 0.35" | Concrete | Reducer Bushing | 0000000 | 000000 |
16" Dia. | ||||||||||
20 mm, 1" | Round | 0.125" | Diamond | Steel | 4,800 | 0.35" | Concrete | Reducer Bushing | 0000000 | 000000 |
Wet-Cutting Blades for Walk-Behind Flat Saws
Use these blades with water or coolant (not included) to produce a smooth cut and minimize heat buildup. Blades with multiple arbor diameters come with a reducer bushing. Choose a narrower width of cut for faster cuts and less material loss.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Arbor Hole Size | Arbor Hole Shape | Width of Cut | Max. Speed, rpm | Abrasive | Body | Diamond Depth | For Use On | Includes | Each | |
12" Dia. | ||||||||||
20 mm, 1" | Round | 0.125" | 5,095 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 000000 | 0000000 |
14" Dia. | ||||||||||
20 mm, 1" | Round | 0.11" | 4,365 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 000000 |
20 mm, 1" | Round | 0.125" | 4,365 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 000000 |
20 mm, 1" | Round | 0.14" | 4,365 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 000000 |
16" Dia. | ||||||||||
20 mm, 1" | Round | 0.125" | 3,820 | Diamond | Steel | 1/4" | Concrete | Reducer Bushing | 0000000 | 000000 |
18" Dia. | ||||||||||
1" | Round | 0.125" | 3,395 | Diamond | Steel | 1/4" | Concrete | __ | 0000000 | 000000 |
1" | Round | 0.14" | 3,395 | Diamond | Steel | 1/4" | Concrete | __ | 0000000 | 000000 |
20" Dia. | ||||||||||
1" | Round | 0.14" | 3,055 | Diamond | Steel | 1/4" | Concrete | __ | 000000 | 000000 |
Portable Cutoff Saw Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
9" Dia. | |||||||||
7/64" | 7/8" | 6,600 | Type 1 | Straight | Diamond | __ | __ | 0000000 | 000000 |
12" Dia. | |||||||||
1/8" | 1" | 6,300 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
1/8" | 20 mm | 6,300 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
14" Dia. | |||||||||
1/8" | 1" | 5,400 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
1/8" | 20 mm | 5,460 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
16" Dia. | |||||||||
1/8" | 1" | 4,700 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 36 | 0000000 | 00000 |
Portable Circular Saw Cutoff Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These silicon carbide wheels are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Angle Grinder Cutoff Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. Wheels are made of silicon carbide abrasive that is reinforced with a layer of fiberglass mesh.
Type 27 cutoff wheels outperform Type 1 wheels when making flush cuts. Also known as raised-hub and depressed-center cutoff wheels.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Arbor Hole Thread Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
Unthreaded Arbor Hole | ||||||||||
4" Dia. | ||||||||||
1/16" | 5/8" | __ | 15,280 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
4 1/2" Dia. | ||||||||||
1/16" | 7/8" | __ | 13,580 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 0000 |
3/32" | 7/8" | __ | 13,300 | Type 27 | Raised Hub | Silicon Carbide | Fiberglass Mesh | 24 | 0000000 | 0000 |
1/8" | 7/8" | __ | 13,300 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 24 | 0000000 | 0000 |
5" Dia. | ||||||||||
1/16" | 7/8" | __ | 12,225 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 0000 |
7" Dia. | ||||||||||
3/32" | 5/8" | __ | 8,500 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 24 | 0000000 | 0000 |
Threaded Arbor Hole | ||||||||||
4 1/2" Dia. | ||||||||||
3/32" | __ | 5/8"-11 | 13,300 | Type 27 | Raised Hub | Silicon Carbide | Fiberglass Mesh | 24 | 0000000 | 0000 |
Multipurpose Angle Grinder Cutoff Wheels
Ideal when working across multiple materials, these wheels are specially constructed to cut plastic, fiberglass, concrete, and ceramic, as well as metal. They also work with sheet metal. They contain less than 0.1% iron, chloride, and sulfur contaminants to prevent corroding and discoloring stainless steel and other nickel-alloyed steel.
Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | For Use On | Grit | Each | |
4 1/2" Dia. | ||||||||||
0.045" | 7/8" | 13,300 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Brass, Ceramics, Concrete, Copper, Fiberglass, Iron, Plastic, Stainless Steel, Steel | 46 | 0000000 | 00000 |
5" Dia. | ||||||||||
0.045" | 7/8" | 12,250 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Brass, Ceramics, Concrete, Copper, Fiberglass, Iron, Plastic, Stainless Steel, Steel | 46 | 0000000 | 0000 |
6" Dia. | ||||||||||
0.062" | 7/8" | 10,200 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Brass, Ceramics, Concrete, Copper, Fiberglass, Iron, Plastic, Stainless Steel, Steel | 46 | 0000000 | 0000 |
7" Dia. | ||||||||||
0.062" | 7/8" | 8,500 | Type 1 | Straight | Aluminum Oxide | Fiberglass Mesh | Aluminum, Brass, Ceramics, Concrete, Copper, Fiberglass, Iron, Plastic, Stainless Steel, Steel | 46 | 0000000 | 0000 |
RotoZip Spiral Saw Cutoff Wheels for Masonry and Concrete
Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels have a layer of fiberglass mesh reinforcement.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
---|---|---|---|---|---|---|---|---|---|
Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Reinforcement | Grit | Each | |
3 1/2" Dia. | |||||||||
0.09" | 11.1 mm | 20,000 | Type 1 | Straight | Silicon Carbide | Fiberglass Mesh | 30 | 0000000 | 00000 |
Dremel Quick-Change Wheels
Swap accessories quickly and safely without tools. These wheels have a special arbor hole that work with a pull-twist-release locking mechanism (sold separately). They are also compatible with standard Dremel wheel arbors with a slotted-head-screw locking mechanism.
Diamond wheels are the most durable and last the longest while producing smooth and precise cuts. They are ideal for cutting hard and abrasive materials such as marble, concrete, brick, porcelain, ceramics, hard epoxy, and soft or hardwood.
For technical drawings and 3-D models, click on a part number.